RS15
|
 |
Key switches
1 micro key-switch with European type cylinder, for surface or fl ush mount.
|
|
RS16
|
|
Key switches
2 micro key-switch with European type cylinder, for surface or fl ush mount.
|
RS10
|
|
Key switches
Fixing post for RS15 and RS16 key-switches.
|
|
RT35
|
|
Keypads
Anti-vandal digipad in stainless steel. Metal keypad with backlight. The EEPROM memory can store up to 60 diff erent codes. Output relays rated at 5A and 1A. Power supply 12V/24V ac/dc.
|
RT36
|
|
Keypads
Polycarbonate digipad with back-lit keypad. The EEPROM memory can store up to 60 diff erent codes. Output relays 5A and 1A. Power supply 12V/24V ac/dc.
|
|
RF36
|
|
Photocells
Infrared beam photocells with automatic centre alignment, for surface or post mounting. Power supply 12V/24V.
|
RF03
|
|
Photocells
Infrared beam photocells for fl ush or post mounting. Alignment through adjustable screws. Shielded electronics on the receiver. Power supply 12V/24V.
|
|
RF33
|
|
Photocells
Infrared beam photocells for surface mounting, particularly on sliding gates. The transmitting photocell can be powered by battery and it can be connected to a sensitive edge. Power supply 12V/24V.
|
RF11
|
|
Photocells
Post for RF36 photocells.
|
|
RF05
|
|
Photocells
Post for RF03 photocells.
|
RL11
|
|
Blinkers
Oval blinker with 2 lamps 10W. Power supply 24V.
|
|
RL09
|
|
Blinkers
Oval clinker with 2 lamps 5W. Power supply 12V.
|
RC21/2
|
|
Sensitive edges
Mechanical anti-crush sensor edge with aluminium stand. 60mm rubber profi le with wire and sensor. Total length 2m. Suitable for sliding gates.
|
|
RC22
|
|
Sensitive edges
Mechanical anti-crush sensor edge with aluminium stand. 25mm rubber profi le with wire and sensor. Total length 2.5m. Suitable for garage doors and road barriers.
|
RT03
|
|
Magnetic detectors
MAGNECTOR single loop vehicle detector. Programming through dip switches. 2 output relays. Power supply 24V.
|
|
RT04
|
|
Magnetic detectors
MAGNECTOR B double loop vehicle detector. Programming through dip switches. 2 output relays. Self-calibrating function in case of interferences. Power supply 24V.
|
Q BAT 1.2
|
|
Back-up batteries
Sealed rechargeable battery 12V 1.2Ah, for swing gates.
|
|
Q BAT 4
|
|
Back-up batteries
Sealed rechargeable battery 12V 4Ah, for sliding gates.
|
RT16
|
|
Electrolocks
Front cylinder electro-lock for swing gates. Reversible. Right or left side fi xing, adjustable from 50 to 70mm. Striker with adjustable height.
|
|
RT18
|
|
Electrolocks
Electromechanical latching mechanism with solenoid release for swing gates.
|
